PPT 2800 Specification Highlights

Physical Characteristics

Dimensions:

7" L x 3.625" W x 1" H/177.8 mm L x 92 mm W x 25.4 mm D

Weight (including battery):

11.7 oz/333 gm (Batch Version)
12.9 oz/367 gm (Wireless Version)

Drop Specification:

4 ft / 1.2 m to concrete

Display:

1/4 VGA resolution (320 x 240 pixels) with 16-level grayscale, optional 64k color

Battery:

1550 mAh rechargeable lithium-ion

Environmental Sealing:

IP54 (windblown dust and rain)

Operating Temperature:

-4° to 122° F/-20° to 50° C (or better depending upon the application)

Humidity:

5% to 90% RH non-condensing

Electrostatic Discharge (ESD):

8 kVdc air; 4 kVdc contact

Performance Characteristics

CPU:

Intel SA 1110 @ 206 MHz Processor

Operating System:

Microsoft Pocket PC 2002

Memory

64 MB RAM/32 MB ROM

Application Development:

Fully compatible with Microsoft SDK for Pocket PCs, Symbol SDK available to support bar code scanning from http://devzone.symbol.com

Communications:

IrDA 1.1

Wireless Data Communications

Wireless Local Area Network:

Standards-based Spectrum24 IEEE 802.11 or 802.11b

   Data Rate:

2 Mbps and 11 Mpbs

   Frequency Range:

Country dependent: typically 2.4-2.5 Ghz

   Output Power:

500 mW U.S.; 100 mW international

   Antenna:

Internal

Wireless Wide Area Network

Optional CDPD, GSM or GPRS Network Connectivity

Antenna:

Internal (WLAN), External (WWAN)

Peripherals and Accessories

Cradles:

1 slot serial charge cradle; 4 slot Ethernet charge cradle; Vehicle cradle, 4-Slot serial cradle

Communication and Charging Cables:

DEX cable; auto-charge cable; serial/charge cable; printer cables

Magnetic Stripe Reader (MSR):

Snap-on serial connection swipe reader attachment

Keypad:

Snap-on serial connection 35-key keypad

Trigger handle:

Snap-on serial connection pistol-grip scan trigger

4-Slot Universal Battery Charger (UBC):

Simultaneous charge of 1-4 batteries; requires adapters for PDT 8100 batteries

Other Accessories:

Snap-on land line modem; carrying case

Regulatory

Electrical Safety:

Certified to UL1950, CSA C22.2 No. 950, EN60950/IEC950

EMI/RFI:

FCC Part 15 Class B, ICES-003 Class B, European Union EMC Directive, Australian SMA

Laser Safety:

CDRH Class II, IEC Class 2

Hazardous Locations:

Certified to UL 913 and CAN/CSA C22.2 no. 157 for use in Class I, Division 2, Groups A, B, C, D.