PDT 7500 Portable Data Terminal Specification Highlights

Physical Characteristics

Dimensions:

8.4 in. H x 3.5 in. W x 2.2 in. D/210 mm H x 89 mm W x 56 mm D

Weight:

Batch: 19 oz./532 gm with battery;
Wireless: 21 oz./588 gm with battery and PCMCIA LAN card

Drop Specification:

Multiple 6 ft./1.8 m drops to concrete (Batch and WLAN); Multiple 5 ft./1.52 m drops to concrete (WWAN)

Display:

1/8 CGA transflective LCD, 240 x 160 pixel resolution, controllable backlight

Battery:

Quick change, rechargeable 7.2V, 1400 mAh smart battery

Environmental Sealing:

IP64 (industry standard for dust and water sealing)

Operating Temperature:

-13º to 122ºF/-25º to 50ºC

Storage Temperature:

-20º to 140ºF/-30º to 60ºC

Humidity:

95% relative humidity (noncondensing)

Electrostatic Discharge:

15kv electrostatic discharge to all surfaces without loss of data

Key Pads:

49-key full alphanumeric; 36-key alphanumeric toggle; 25-key numeric-only

Touch Screen:

Scratch-resistant Mylar overlay

Laser Source:

Visible Laser Diode at 650-680 nm

Scan Engines:

SE 2200, SE 1200 High Performance, SE 4200 (Imager)

Status Indicator Lights:

Wireless operation, good decode, battery level

Control Switches:

Power ON/OFF, contrast, backlight, alphanumeric toggle

Performance

Microprocessor:

AMD Elan SC400, 32-bit Am486 CPU, 33/66 MHz

Operating System

Microsoft MS-DOS 6.22, Microsoft Windows CE 2.11, Microsoft Windows CE 3.0

RAM Memory:

4 MB, 8 MB or 16 MB standard for MS-DOS, 16 MB standard for CE 2.11/3.0

Flash:

4 MB, 8 MB or 16 MB nominal internal flash memory module

Real-Time Clock:

Time and date stamping under software control

Interfaces:

Infrared port, IrDA 1.0 standard compatible @ 115.2 Kbps for batch communications

Wireless Data Communications

Wireless Local Area Network:

Optimal IEEE standards-based on Spectrum24® 802.11 or 802.11b

Data Rate:

2 Mbps (frequency hopping) and 11 Mbps (direct sequence)

Frequency Range:

Country dependent, typically 2.4 to 2.5GHz

Output Power:

500mW US, 100mW International

Wireless Wide Area Network:

DataTac

Antenna:

Internal (WLAN), External (WWAN)

Peripherals

Cradles:

Single-slot cradle, four-slot cradle and vehicle cradle available for charging and serial (RS-232) communications

Printers:

Supports extensive line of Symbol-approved printers, cables and accessories

Regulatory 

EMI/RFI:

FCC Part 15 Class A, EMC Directive, Australian SMA

Laser Class:

CDRH II, IEC825-1/EN60825-1 Class II

Electrical:

UL1950, CSA C22.2 No. 950, EN60950/IEC950

 
ce
codelogo Pr_sp_ca