ScanPlusTM 1800 Specifications
Length: 180 mm (7)
Length Standard cable: 1.8 m (70)
Width at handle: 33 mm (1.3)
Width at head: 64 mm (2.5)
Weight without cable: 1800 SR/PDF:145g (5.1 oz)
Weight without cable: 1800 ST: 165g (5.8 oz)
Case: high-impact ABS self-extinguishing plastic. Rubber end cap and boot.
Supply: +5VDC +-10% current consumption approx. 150mA, depending on configuration
Special Features:
Firmware updates via flash memory, programmable data format (code identification, preambles and postambles, intercharacter and intermessage delays, variable time-out, and many others)
Flash memory:
1800 SR & PDF Optics:
CCD linear image sensor with sharp aiming beam. Light source: red, long life
LEDs
1800 ST Optics: visible laser diode @ 670nm. Laser Class 2 IEC 825 / CDRH
Class II
Operator Feedback: Green good read LED. Adjustable beeper
Microprocessor: Custom
chip (ASIC inc. DSP processor) for fast signal processing and decoding. Special
routines for PDF 417.
Interfaces: All scanners support (by choice of cable): Wand & Laser
emulation, single or dual RS232, IBM 46xx, OCIA and PC AT/PS2 wedge to over 400
terminals and PCs. Extensive interface information on application
All models: UPC E, A, EAN, Code 39; Interleaved, Matrix, Industrial and Standard 2 of 5; Code 128, UCC EAN 128, Codabar, Code 93, MSI, Plessey.
1800 PDF: PDF417
Performance: 1800 SR and
PDF
Scan rate: 400 scans per sec. max (SR); 600 scans per sec. max (PDF)
Minimum X dimension: 0.1 mm (4 mil)
Depth of field*: 0 to 10 cm (4) depending
on code:
0 .1 mm (4 mil): 0-2 cm (0-0.8)
0.254 mm (10 mil): 0-4 cm (0-1.6)
100% EAN /UPC: 0-5.5 cm (0-2.1)
0.38 mm (15 mil): 0-6 cm (0-2.4)
0.5mm (20 mil): 0-7 cm (0-2.7)
0.7 mm (27 mil): 0-10 cm (0-4)
*Only applies to SR Model
PCR: 25% minimum
Code Width: 12 cm (4 in.) max (X above .254 /10 mil)
Skew: +- 65°
Pitch: +- 70°
Performance: 1800 ST
Scan rate: 36 s/sec
Minimum X dimension: 0.125 (5 mil)
Depth of field: up to 50cm (20)
depending on code:
0.125 mm (5 mil): 2.5-8 cm (1-3)
0.254 mm (10 mil): 0-20 cm (0-7.9)
100% EAN /UPC: 0-25 cm (0-10)
0.38 mm (15mil): 0-30 cm (0-12)
0.5 mm (20 mil): 0-50 cm (0-20)
PCR: 25% minimum
Code Width:
Skew: +- 55°
Pitch: +- 65°
Setup options include EasySet PC Windows software, by direct connection, setup bar code printing (custom setup utility) or by conventional bar code setup manual.
Desk/vertical holder
(standard)
Raised hands-free stand (option)
Operating Temperature: 0°
to 40°C (32° to 104°F)
Storage Temperature: -25° to 60°C (-13° to 140°F)
Humidity: 10% to 90% non-condensing
Drop Survival: withstands multiple drops of 1m (3.2 ft) to commercial flooring
1800 ST only:
US DHHS Standard 21 CFR 1040, 10 and 1040,11 (1994) as a Class II Laser product, IEC 825-1 (1993) & EN 60825-1 (1994) Class 2.
All models:
Complies with FCC Part 15, CE Directives 89/336/EEC, 72/23/EEC and Low Voltage Directive EN 60742 (1995).
Some approvals and features may vary by country and may change without notice. Please check with your local Intermec sales office for further information.